Section 1502 (the Conflict Minerals Statutory Provision) of the Dodd-Frank Wall Street Reform and Consumer Protection Acti required the Securities and Exchange Commission to issue new disclosure and reporting obligations for issuers concerning “conflict minerals” that originate in the Democratic Republic of the Congo (DRC) or an adjoining country. On December 15, 2010, the SEC proposed a release (the Proposing Release) to implement The Conflict Minerals Statutory Provision.ii
After considering thousands of comments and conducting a public roundtable, the SEC recently adopted (by a 3 – 2 vote) new rules and a new form relating to the use of conflict minerals.iii The new rules apply to substantially all issuers that file reports under Section 13(a) or Section 15(d) of the Exchange Act and impose additional disclosure requirements on issuers that use conflict minerals in, or to produce, their products.
The new rules adopt a three-step analytic process to guide issuers through the applicable disclosure requirements, with each step building on the prior step. (See Annex A below, a flowchart summarizing the steps and related disclosures required by the new rules.) Depending on the outcome of the three-step analytic process, an issuer may have to submit a report to the SEC that includes a description of the measures it took to exercise due diligence on the conflict mineral’s source and chain of custody. To facilitate the new disclosure required by the rules, the SEC has also adopted a new Form SD.
Compliance with the new rules is required beginning with the year ending December 31, 2013, with affected issuers submitting the initial Form SD by May 31, 2014.
We believe that many issuers subject to the new rules will have to develop special risk management or supply chain management programs. To assist companies in assessing their need to file Form SD and, if required, in developing these procedures and programs, we provide a summary of the new rules below.
What is a conflict mineral?
The term “conflict mineral” is defined in Section 1502(e)(4) of the Dodd-Frank Act as (1) columbite-tantalite, also known as coltan (the metal ore from which tantalum is extracted); cassiterite (the metal ore from which tin is extracted); gold; wolframite (the metal ore from which tungsten is extracted); or their derivatives; or (2) any other mineral or its derivatives determined by the Secretary of State to be financing conflict in the DRC or an adjoining country. The new reporting requirements apply to these four minerals and their derivatives of tantalum, tin and tungsten.
These minerals are used in a wide variety of products, including electronic components and circuit boards, various tools, jet engine components, jewelry, wires, electrodes and electrical contacts. Given the wide use of conflict materials, various industry organizations have estimated that up to 6,000 companies will be directly affected by these new rules, and a much larger number of participants in the supply chain will be indirectly affected.
What is an “adjoining country”?
The term “adjoining country” is defined in Section 1502(e)(1) of the Dodd-Frank Act as a country that shares an internationally recognized border with the DRC, which currently includes Angola, Burundi, Central African Republic, the Republic of the Congo, Rwanda, South Sudan, Tanzania, Uganda and Zambia. In the Proposing Release, the SEC referred to the DRC and its adjoining countries as the “DRC Countries.” In the final rules, the SEC used the term “Covered Countries” instead. The SEC indicated that both terms have the same meaning.
What is the goal of the conflict mineral rules?
In enacting the Conflict Minerals Statutory Provision, Congress indicated that it intended to further the humanitarian goal of ending the long and extremely violent conflict in the DRC, which has been partially financed by the exploitation and trade of conflict minerals originating in the DRC. Congress’s main purpose was to inhibit the ability of armed groups in certain countries to fund their activities by exploiting the global trade in these minerals. By reducing the use of such conflict minerals, Congress hopes to help reduce funding for these armed groups and thereby pressure them to end the conflict. Indeed, Section 1502(a) of the Dodd-Frank Act explains that the exploitation and trade of conflict minerals by armed groups is helping to finance the conflict and that the emergency humanitarian crisis in the region warrants these new disclosure requirements.
To accomplish its goal, Congress chose to use the Exchange Act’s disclosure requirements, which would raise public awareness about the origins of issuers’ conflict minerals and would promote the exercise of due diligence on conflict mineral supply chains.
The exclusion of recycled or scrap materials from the detailed reporting requirements reflects the SEC’s view that an issuer’s use of such materials would not fund the armed groups in the DRC. In addition, the SEC stated that it believes these new disclosures will provide information that is material to an investor’s understanding of the risks in an issuer’s reputation and supply chain.iv
What is the procedural history behind the new rules?
On December 15, 2010, the SEC issued the Proposing Release to implement the Conflict Minerals Statutory Provision. Like the Conflict Minerals Statutory Provision itself, the Proposing Release was controversial. Based upon a number of comments, the SEC extended the comment period and held a public roundtable at which invited participants, including investors, affected issuers, human rights organizations and other stakeholders, discussed their views and provided input on issues related to the rulemaking.
After the SEC Roundtable, the SEC invited further comments. The SEC received extensive comments, including some in which the commenters indicated that the proposed rules would lead to a de facto boycott or embargo on conflict minerals from certain countries that could have serious negative implications on the miners and their families.v Based upon a review of the comment letters and the SEC Roundtable, the SEC adopted the new rules on August 22, 2012.
Do the new rules apply to all reporting companies?
The new rules apply to issuers that file reports with the SEC under Section 13(a) or Section 15(d) of the Exchange Act. The rules apply equally to domestic companies, foreign private issuers and smaller reporting companies. The new rules do not apply to registered investment companies.
How do those companies determine if they are required to provide reports?
The new rules adopt a three-step analytic process, in which each step builds on the prior step. Depending on the outcome of the three-step analytic process, issuers may have to submit a report to the SEC that includes a description of the measures it took to exercise due diligence on the conflict mineral’s source and chain of custody.
What is the first step in the analysis for an issuer to determine whether the new rules apply?
The first step is for an issuer to determine whether there are any conflict minerals that are necessary to the functionality or production of a product manufactured or contracted to be manufactured by that issuer.
Has the SEC defined the terms “contract to manufacture,” “necessary to the functionality” or “necessary to the production”?
No. As with the Proposing Release, the SEC did not define these terms. However, as described below, the SEC provided some guidance on the meaning of each of the terms .
What factors should be considered in determining whether an issuer will be deemed to “contract to manufacture” a product?
Whether an issuer will be deemed to “contract to manufacture” a product depends on the degree of influence it exercises over the materials, parts, ingredients or components to be included in any product that contains conflict minerals or their derivatives.
The SEC guidance indicates that an issuer will not be considered to “contract to manufacture” a product if it does no more than take the following actions:
(1) specifies or negotiates contractual terms with a manufacturer that do not directly relate to the manufacturing of the product (unless it specifies or negotiates taking these actions so as to exercise a degree of influence over the manufacturing of the product that is practically equivalent to contracting on terms that directly relate to the manufacturing of the product)
(2) affixes its brand, marks, logo, or label to a generic product manufactured by a third party or
(3) services, maintains, or repairs a product manufactured by a third party
What factors should be considered in determining whether a conflict mineral is deemed “necessary to the functionality” or “necessary to the production” of a product?
The SEC indicated that the determination of whether a conflict mineral is deemed “necessary to the functionality” or “necessary to the production” of a product depends on the issuer’s particular facts and circumstances.
In determining whether a conflict mineral is “necessary to the functionality” of a product, an issuer should consider:
(1) whether the conflict mineral is intentionally added to the product or any component of the product and is not a naturally occurring by-product
(2) whether the conflict mineral is necessary to the product’s generally expected function, use or purpose and
(3) if conflict mineral is incorporated for purposes of ornamentation, decoration or embellishment, whether the primary purpose of the product is ornamentation or decoration
In determining whether a conflict mineral is “necessary to the production” of a product, an issuer should consider:
(1) whether the conflict mineral is intentionally included in the product’s production process, other than if it is included in a tool, machine or equipment used to produce the product (such as computers or power lines)
(2) whether the conflict mineral is included in the product and
(3) whether the conflict mineral is necessary to produce the product
In this regard, the SEC modified its guidance from the Proposing Release such that, for a conflict mineral to be considered “necessary to the production” of a product, the mineral must be both contained in the product and necessary to the product’s production.
What happens if a conflict mineral is used as a catalyst? Do the new rules apply to such use?
No. Based on the reporting requirements established in the Conflict Minerals Statutory Provision, the SEC does not consider a conflict mineral “necessary to the production” of a product if the conflict mineral is used as a catalyst, or in a similar manner in another process, that is necessary to produce the product as long as the mineral is not contained (even in trace amounts) in that product.
Are entities that mine conflict minerals deemed subject to the new rules?
No. In a change from the Proposed Release, the final rule does not treat an issuer that mines conflict minerals as “manufacturing” those minerals unless the issuer also engages in manufacturing.
Do the new rules apply to conflict minerals that are “outside the supply chain” prior to January 31, 2013?
No. The final rule exempts any conflict minerals that are “outside the supply chain” prior to January 31, 2013. Under the final rule, conflict minerals are “outside the supply chain” if they have been smelted or fully refined or, even if they have not been smelted or fully refined, if they are outside the Covered Countries.
What about acquired companies?
In response to comments, the final rule allows issuers that obtain control over a company that manufactures or contracts for the manufacturing of products with conflict minerals that previously had not been obligated to provide a Form SD for those minerals to delay reporting on the acquired company’s products until the end of the first reporting calendar year that begins no sooner than eight months after the effective date of the acquisition.
After undertaking the analysis described above, if an issuer determines that its products do not involve conflict minerals, does it have any disclosure obligations?
No. If an issuer determines that its products do not involve conflict minerals after undertaking the analysis described above, the issuer is not required to take any action, make any disclosure, or submit any reports under the new rules. However, if an issuer determines that it is subject to the new rules, it will have additional disclosure obligations and will need to proceed with the analysis to determine the nature and extent of its disclosure obligations.
If an issuer has determined that the new rules apply to it, what is the second step in the analysis?
Any issuer that determines it is subject to the new rules as a result of the first step must conduct a “reasonable country of origin inquiry” (RCOI) and thereafter file a Form SD. The RCOI is intended to determine whether the conflict minerals in the issuer’s products originated from a Covered Country or from recycled or scrap sources.
The SEC did not provide guidance on the actions an issuer must take in order to undertake a RCOI; instead, it noted that each such inquiry depends upon the issuer’s facts and circumstances. The final rules clarify that any RCOI must be undertaken in “good faith” by an issuer. While the SEC did not prescribe the steps required for a RCOI, it did note that an issuer would satisfy the RCOI standard if it “seeks and obtains reasonably reliable representations indicating the facility at which its conflict minerals were processed and demonstrating that those conflict minerals did not originate in Covered Countries or were from recycled or scrap sources.”
After conducting the RCOI, the issuer must file a Form SD. The disclosures in the Form SD will vary depending on the findings of the RCOI. If, based on the RCOI, an issuer (a) knows that its conflict minerals did not originate in the Covered Countries or did come from recycled or scrap sources, or (b) has no reason to believe that the conflict minerals may have originated in the Covered Countries and may not be from recycled or scrap sources, then the issuer is required to file a Form SD, but it is not required to prepare or file the more detailed Conflict Minerals Report discussed below. The Form SD should (1) disclose the issuer’s determination, (2) describe the RCOI it undertook in reaching the determination and (3) disclose the results of the inquiry. This requirement for an issuer to briefly describe its inquiry and the results of the inquiry is a change from the disclosure required in the Proposing Release. The issuer is also required to make its description publicly available on its Internet website and provide its Internet URL in the Form SD.
If, however, based on its RCOI, an issuer knows or has reason to believe that the conflict minerals (1) may have originated in the Covered Countries and (2) may not be from recycled or scrap sources, then the issuer must undertake “due diligence” on the source and chain of custody of its conflict mineralsvi as described below in the third step.
If an issuer has determined it must conduct due diligence on its conflict minerals, what is the third step in the analysis?
If, based on its RCOI discussed above in step two, the issuer determines that its conflict minerals did originate from a Covered Country or the issuer has reason to believe that such minerals may have originated in a Covered Country and are not from recycled or scrap sources, it is required to file a Conflict Minerals Report with its Form SD.
The Conflict Minerals Report will state the issuer’s determination as to whether its products are (1) DRC Conflict Free or (2) Not DRC Conflict Free. The Conflict Minerals Report must be audited under a standard set forth in the final rules.
Is there any temporary relief for issuers who are in the process of undertaking the requirements of the third step?
Yes. The final rules also provide for a temporary category – “DRC Conflict Undeterminable” for issuers who are unable to determine whether the conflict minerals in their products originated in a Covered County or financed or benefitted armed groups in Covered Countries.
The rules provide a temporary transition period for two years for all issuers and four years for smaller reporting companies. During this temporary transition period, issuers may describe their products as “DRC Conflict Undeterminable” if they are unable to determine that their minerals meet the statutory definition of “DRC Conflict Free” for either of two reasons:
(1) they proceeded to step three based upon the conclusion, after their RCOI, that they had conflict minerals that originated in the Covered Countries and, after the exercise of due diligence, they are unable to determine if their conflict minerals financed or benefited armed groups in the Covered Countries, or
(2) they proceeded to step three based upon the conclusion, after their RCOI, that they had a reason to believe that their conflict minerals may have originated in the Covered Countries and may not have come from recycled or scrap sources and the information they gathered as a result of their subsequently required exercise of due diligence failed to clarify:
(a) the conflict minerals’ country of origin
(b) whether the conflict minerals financed or benefited armed groups in those countries or
(c) whether the conflict minerals came from recycled or scrap sources
However, if these products also contain conflict minerals that the issuer knows directly or indirectly financed or benefited armed groups in the Covered Countries, the issuer may not describe those products as “DRC Conflict Undeterminable.” Also, during the transition period, issuers with products that may be described as “DRC Conflict Undeterminable” are not required to have the otherwise required audit of the conflict minerals diligence. Such issuers, however, must still file a Conflict Minerals Report describing their due diligence, and must additionally describe the steps they have taken or will take, if any, since the end of the period covered in their most recent prior Conflict Minerals Report, to mitigate the risk that their conflict minerals benefit armed groups, including any steps to improve their due diligence.
Example: An issuer has conducted due diligence because, based on its RCOI, it has reason to believe that its necessary conflict minerals may have originated in the Covered Countries and may not have come from recycled or scrap sources. The issuer has determined that its conflict minerals did not, in fact, originate in the Covered Countries, or it determined that its conflict minerals did, in fact, come from recycled or scrap sources. Is such an issuer required to submit a Conflict Minerals Report?
No. That issuer is not required to submit a Conflict Minerals Report. However, that issuer is still required to submit a Form SD disclosing its determination and briefly describing its inquiry and its due diligence efforts and the results of that inquiry and due diligence efforts, which should demonstrate why the issuer believes that the conflict minerals did not originate in the Covered Countries or that they did come from recycled or scrap sources.
When is the Form SD due?
Reporting on a Form SD is based on a calendar year for all issuers. An issuer with conflict minerals necessary to the functionality or production of a product it manufactures or contracts to be manufactured is required to file its Form SD by May 31 of each year, reporting on the preceding calendar year. The Form SD, including the Conflicts Minerals Report, if required, is considered “filed” for the purposes of Section 18 of the Exchange Act.
How long is an issuer required to make available its conflict minerals disclosure or Conflict Minerals Report on its website?
An issuer much make its conflict minerals disclosure or its Conflict Minerals Report available on the issuer’s Internet website for one year.
Conclusion: many companies will be required to undertake this analysis
The debate continues about using the US securities disclosure laws and the SEC’s exercise of its rulemaking authority to promote the humanitarian goal of ending the conflict in the DRC. It remains to be seen whether the activities of the parties causing the human rights abuses will be curtailed by the new rules. What is certain is that the new rules will apply broadly and be costly. The SEC estimates that approximately 6,000 companies could be impacted by the new rules, with initial compliance costs of between US$3 billion and US$4 billion (compared to some industry estimates ranging up to US$16 billion).
Given the wide use of conflict minerals in products, it is clear that many companies will be required to undertake at least part of the three-step analytic process in determining how the new rules apply to them, with some issuers incurring substantial ongoing costs. Many companies have been working on these issues for several months, while others are at the beginning of the assessment process.
We believe that companies should be evaluating their products under the “first step” test to determine whether conflict minerals are “necessary for the functionality or production” of these products. We expect that best practices regarding the new rules will develop over time (including such items as supplier certifications, contractual representations and third-party verification of refineries and smelters as “DRC Conflict Free”) to assist issuers undertaking this process ,and we are working with clients to address these issues. Please contact Sanjay Shirodkar, Andrew Ledbetter or Douglas Rein or your DLA Piper contact http://www.dlapiper.com/global/people/ for more information..
Below please find a flowchart to help you understand the reporting requirements. We have also prepared this chart as a printable PDF for your reference. View the printable PDF.
i Pub. L. 111-203, 124 Stat. 1376 (July 21, 2010).
ii Conflict Minerals, Release No. 34-63547 (Dec. 15, 2010) [75 FR 80948].
v Letter from International Corporate Accountability Roundtable (Aug. 24, 2011).